The three components
A booster system has three parts: an outdoor (donor) antenna that captures the weak cell signal, an amplifier unit that boosts it, and an indoor antenna that rebroadcasts the boosted signal inside the rig. All three n...
Connectivity guide
weBoost install done without oscillation
RV OWNER’S FIELD GUIDE · CONNECTIVITY & SAFETY A cell booster doesn’t create signal out of nothing — it amplifies whatever weak signal is already reaching your roof antenna. Install it wrong and you can end up with worse...
Active corridor: Montana · Wyoming · Idaho · Washington — case-by-case beyond.
Field notes
RV OWNER’S FIELD GUIDE · CONNECTIVITY & SAFETY A cell booster doesn’t create signal out of nothing — it amplifies whatever weak signal is already reaching your roof antenna. Install it wrong and you can end up with worse performance than no booster at all.
Avoiding oscillation feedback
If the outdoor and indoor antennas are placed too close together, the amplifier can pick up its own output and re-amplify it — oscillation feedback — which the system detects and responds to by reducing gain automatic...
Corridor service
Active MT · WY · ID · WA. Case-by-case beyond — trip fee quoted before we roll.
When to book
DIY ends at sealed systems, gas work, and inverter commissioning. Diagnostic $150 applied toward repair.
Related: All guides · Book a Service · Pricing
Pricing teaser
Trip fee $75 within 30 miles, then $1.50/mi. Labor ~$150/hr (1-hour minimum, billed in 30-minute increments). Diagnostic $150 applied toward repair if you proceed.
Active corridor: Montana · Wyoming · Idaho · Washington — case-by-case beyond. Credentials (text): Victron Professional Certified Installer · weBoost Authorized Installer · Peplink Certified Associate · Dometic Professional Certified.